ATSAMD10D14A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | SAM D10D |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 22 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 4.07mA |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M0 |
| Low Power Mode | YES |
| Number of External Interrupts | 8 |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 6 |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD10D14A-MUT Overview
Due to its space-saving qualities, it is available in the 24-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It is available in the Tape & Reel (TR) package. There is a ARM? Cortex?-M0+ as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 22 I/Os on it. Other components that are comparable to it have the base part number ATSAMD10. A QUAD position is assigned to its terminals. 24 terminations are present in it. There are a number of electrical components in the SAM D10D series, including this one. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 24 pins are used in its construction. During the mounting process, the device is mounted based on the Surface Mount method. Subcategory Microcontrollers includes this component. In order to store data and programs, the devices have a memory size of 16kB. A core architecture of ARM is used. There is a maximum current supply of 4.07mA. When working at a frequency of 48MHz it is able to achieve excellent efficiency. 3 timers/counters are in use. It is a member of the CORTEX-M0 family of CPUs. Normally, the supply voltage (Vsup) should remain above 1.62V. An oscillator of type Internal is used.
ATSAMD10D14A-MUT Features
24-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD10D14A-MUT Applications
There are a lot of Microchip Technology ATSAMD10D14A-MUT Microcontroller applications.
- Tape drives
- Robots
- Data acquisition and control
- Keyboards
- Computer/laptop
- Torpedo guidance
- Glucose monitoring systems (for Type 1 Diabetes)
- ECG machine
- Leakage current tester
- Christmas lights
