ATSAMD20E14A-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 188.609377mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E14 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 128 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD20E14A-MU Overview
For space savings, it is available in the 32-VFQFN Exposed Pad package. Surface Mount is the way to mount it. A package of Tray contains it. With a processor of ARM? Cortex?-M0+ cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 26 I/Os on it. It has a part number of ATSAMD20E14 that can be used to locate similar components. The position of the device is QUAD at terminal. 32 terminationals are present. In the SAM D20E series, this electrical component is found. Using the 3.3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 32 pins. The component is included in Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. ARM forms the basis of its architecture. It is powered by a 1.8/3.3V?source. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. In total, there are 6 timers and counters. It is one of the members of the CPU family CORTEX-M0. The number 26 represents the number of programmable I/O ports on the board. There is an oscillator type Internal used in this circuit.
ATSAMD20E14A-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E14A-MU Applications
There are a lot of Microchip Technology ATSAMD20E14A-MU Microcontroller applications.
- Multi-meter
- PDAs, game consoles
- Electromechanical control
- Wastewater treatment
- Firewalls
- Instrument control
- Keyboards
- Radio
- Microwave ovens
- Dishwashers
