ATSAMD20E14A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 188.609377mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E14 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 128 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20E14A-MUT Overview
To save space, it is included in the 32-VFQFN Exposed Pad package. A Surface Mount mounting method is used. A package of Tape & Reel (TR) contains it. There is a ARM? Cortex?-M0+ as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. It has a number of 26I/Os. A comparable component can be found by using the base part number ATSAMD20E14. The terminals of this device are set to QUAD. A 32 termination is contained within it. The SAM D20E series contains this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. For its construction, 32 pins are used. This component is a part of Microcontrollers. A device with a memory size of 16kB can store programs and data. There is ARM core architecture for this system. Power comes from a source of 1.8/3.3V. It performs extremely well at a frequency of 48MHz. In total, there are 6 timers and counters. It is part of the CORTEX-M0 CPU family. There are a total of 26 programmable I/Os available. An oscillator of type Internal is used.
ATSAMD20E14A-MUT Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E14A-MUT Applications
There are a lot of Microchip Technology ATSAMD20E14A-MUT Microcontroller applications.
- Smartphones-calling, video calling, texting, email
- Playstation
- Smoke alarms
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Robotic prosthetic limbs
- Calculators
- Routers
- Graphic terminals
- Radio
- Automatic control
