ATSAMD20E14B-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E14 |
| JESD-30 Code | S-PQFP-G32 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| Speed | 48MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 16384 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20E14B-AU Overview
For space savings, it is available in the 32-TQFP package. The way of Surface Mount is used to mount it. A package of Tray contains it. With a processor of ARM? Cortex?-M0+ cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory it uses is FLASH. 26 I/Os have been provided by the device. In order to find similar components, it has a base part number of ATSAMD20E14. At QUAD, it has its terminals. Currently, it consists of 32 terminationals. An electrical component such as this is included in the series SAM D20E. The 3.3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. 32MHz is the frequency of the device's clock. Normal operation requires a supply voltage (Vsup) above 1.62V. It works with an oscillator type Internal.
ATSAMD20E14B-AU Features
32-TQFP package
Mounting type of Surface Mount
ATSAMD20E14B-AU Applications
There are a lot of Microchip Technology ATSAMD20E14B-AU Microcontroller applications.
- Industrial robot
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Christmas lights
- Fax machines
- Entertainment-radios, CD players, televisions
- DCS control intelligent sensor
- Accu-check
- Hand-held metering systems
- Gas monitoring systems
- Scanners
