ATSAMD20E15A-AU
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E15 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 256 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
ATSAMD20E15A-AU Overview
It is available in the 32-TQFP package for the benefit of saving space. Surface Mount is the way to mount it. In the package Tray, it is included. With a processor of ARM? Cortex?-M0+ cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. A total of 26 I/Os are present. Based on its base part number of ATSAMD20E15, other similarly-sized components can be found. QUAD is the position of its terminals on the board. 32 terminations are present in it. The SAM D20E series contains this electrical component. The supply voltage of 3.3V allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A number of 32 pins are used to construct it. This is a component included in Microcontrollers. Memory size for the devices is 32kB, which can be used to store programs and data. A core architecture of ARM is used. Powered by a 1.8/3.3V source. Working at a frequency of 48MHz results in excellent efficiency. 6 timer/counters are present. The part is a part of the CORTEX-M0 CPU family. The number of programmable inputs and outputs is 26. The oscillator type Internal is used to operate the device.
ATSAMD20E15A-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E15A-AU Applications
There are a lot of Microchip Technology ATSAMD20E15A-AU Microcontroller applications.
- Entertainment products
- Information appliances (networking of household appliances)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Sonography (Ultrasound imaging)
- Radio
- Instrument control
- DCS control intelligent sensor
- Copiers
- Leakage current tester
- Teletext terminals
