ATSAMD20E15B-AU
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| Speed | 48MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E15 |
| JESD-30 Code | S-PQFP-G32 |
ATSAMD20E15B-AU Overview
For the purpose of saving space, it is available in the 32-TQFP package. This is mounted using the Surface Mount method. It is available in the Tray package. The device has a ARM? Cortex?-M0+ core processor. Maintain a temperature of -40°C~85°C TA while working. The type of memory it uses is FLASH. 26 I/Os can be found on it. To find equivalent components, use its ATSAMD20E15 base part number. A QUAD position is assigned to its terminals. It consists of 32 terminationals. An electrical component such as this is included in the series SAM D20E. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. During the operation of the device, the clock runs at a frequency of 32MHz. During normal operation, the supply voltage (Vsup) should be kept above 1.62V. There is an oscillator type Internal used in this circuit.
ATSAMD20E15B-AU Features
32-TQFP package
Mounting type of Surface Mount
ATSAMD20E15B-AU Applications
There are a lot of Microchip Technology ATSAMD20E15B-AU Microcontroller applications.
- Traditional industrial transformation
- Smoke alarms
- Electromechanical control
- Digital TVs
- Fire detection & safety devices
- Tape drives
- Hard drives
- Medical instruments chromatographs
- Security systems
- Entertainment products
