ATSAMD20E16B-MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E16 |
| JESD-30 Code | S-XQCC-N32 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| Speed | 48MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 65536 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20E16B-MN Overview
There is a 32-VFQFN Exposed Pad package available to save space. This is mounted using the Surface Mount method. It comes in the package?of a Tray. A ARM? Cortex?-M0+ core processor powers the device. During work, the temperature should remain at -40°C~105°C TA. Its type of program memory is FLASH. 26 I/Os have been provided by the device. Based on the ATSAMD20E16 base part number, it can be compared with other components. At QUAD, its terminals are located. As far as terminations are concerned, there are 32 terminations present. There are a number of electrical components in the SAM D20E series, including this one. High efficiency is possible due to the 3.3V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. In the device, the clock runs at 32MHz. Normal operation requires a supply voltage (Vsup) above 1.62V. An oscillator of type Internal is used.
ATSAMD20E16B-MN Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20E16B-MN Applications
There are a lot of Microchip Technology ATSAMD20E16B-MN Microcontroller applications.
- Mice
- Calculators
- Hard drives
- Fire detection & safety devices
- Entertainment-radios, CD players, televisions
- Speed meter
- DDC control
- Oil and gas
- DVD\DV\MP3 players
- Smoke alarms
