ATSAMD20E18A-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E18 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 26 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD20E18A-AN Overview
It is available in the 32-TQFP package for the benefit of saving space. Mounted using Surface Mount. It comes in a Tray package. There is a ARM? Cortex?-M0+ as core processor in this device. When working, the temperature should be kept at -40°C~105°C TA. FLASH has been assigned to it as a program memory. A total of 26 I/Os are present. A comparable component can be found by using the base part number ATSAMD20E18. The terminals of this device are set to QUAD. Currently, it consists of 32 terminationals. The SAM D20E series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed with 32 pins. A device with a memory size of 256kB can store programs and data. In terms of architecture, it is based on ARM. It is highly efficient when it works at a frequency of 48MHz. 6 timers/counters are in use. There are 26 programmable I/Os in the device. Internal is the oscillator type it uses.
ATSAMD20E18A-AN Features
32-TQFP package
Mounting type of Surface Mount
ATSAMD20E18A-AN Applications
There are a lot of Microchip Technology ATSAMD20E18A-AN Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Calculator
- Digital set-top boxes
- Graphic terminals
- Current meter
- Safety -airbags, automatic braking system (ABS)
- Temperature sensing and controlling devices
- Instrument control
- Washing machines
- Electronic jamming systems
