ATSAMD20E18A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 2 Mb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20E18A-AU Overview
Due to its space-saving qualities, it is available in the 32-TQFP package. Using Surface Mount, it is mounted. Tray is the package that contains it. A ARM? Cortex?-M0+ core processor powers the device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 26 I/Os have been provided by the device. It has a part number of ATSAMD20E18 that can be used to locate similar components. QUAD is the position of its terminals on the board. This circuit consists of 32 terminationals. This electrical component is part of the SAM D20E series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 32 pins are used in its construction. It is one of the components included in Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. There is ARM core architecture for this system. Power is provided by a 1.8/3.3V source. Working at a frequency of 48MHz results in excellent efficiency. 1.8V provides an adaptable and voltage-independent supply voltage when it is used by designers. The number of timers and counters is 6. It is one of the members of the CPU family CORTEX-M0. The number of programmable inputs and outputs is 26. It works with an oscillator type Internal.
ATSAMD20E18A-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E18A-AU Applications
There are a lot of Microchip Technology ATSAMD20E18A-AU Microcontroller applications.
- Fabric
- Current meter
- Volt meter
- Digital cameras
- Traditional industrial transformation
- Virtual reality VR robots
- Equipment control
- Magnetic resonance imaging (MRI)
- Toys
- Electromechanical control
