ATSAMD20E18A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 188.609377mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20E |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ATSAMD20E18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 2 Mb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Max Frequency | 48MHz |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20E18A-MUT Overview
Due to the benefits of saving space, it is available in the 32-VFQFN Exposed Pad package. Surface Mount is the way to mount it. You can find it in the package of Tape & Reel (TR). Devices with ARM? Cortex?-M0+ core processors are available. During work, the temperature should remain at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 26 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number ATSAMD20E18. QUAD is the position of its terminals on the board. In this case, there are 32 terminationals. SAM D20E is the series number of this electrical component. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 32 pins. In Microcontrollers, this component is included. The devices have a memory size of 256kB that can be used to store programs and data. ARM is its core architecture. A 1.8/3.3V power source powers it. 1.8V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 6 timers/counters set up on the system. A maximum frequency of 48MHz is used by the device. The part is a part of the CORTEX-M0 CPU family. There are a total of 26 programmable I/Os. An oscillator type Internal is required for it to work.
ATSAMD20E18A-MUT Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E18A-MUT Applications
There are a lot of Microchip Technology ATSAMD20E18A-MUT Microcontroller applications.
- Smart instruments
- Toys
- Leakage current tester
- Sonography (Ultrasound imaging)
- Heart rate monitors
- Ipad
- Copiers
- Smoke alarms
- DVD\DV\MP3 players
- Christmas lights
