ATSAMD20G14B-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G14 |
| JESD-30 Code | S-PQFP-G48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| Speed | 48MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20G14B-AU Overview
For the purpose of saving space, it is available in the 48-TQFP package. A Surface Mount mounting method is used. It comes in a Tray package. With a processor of ARM? Cortex?-M0+ cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. It has a number of 38I/Os. Other components that are comparable to it have the base part number ATSAMD20G14. The terminals of this device are set to QUAD. It consists of 48 terminationals. It is a member of the SAM D20G series of electrical components. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. During the operation of the device, the clock runs at a frequency of 32MHz. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.62V. It works with an oscillator type Internal.
ATSAMD20G14B-AU Features
48-TQFP package
Mounting type of Surface Mount
ATSAMD20G14B-AU Applications
There are a lot of Microchip Technology ATSAMD20G14B-AU Microcontroller applications.
- Process control devices
- Microwave ovens
- Computers and laptops-video calling, email, blogging
- Hand-held metering systems
- Embedded gateways
- Gas monitoring systems
- Volt meter
- Microwave ovens
- Instrument control
- Medical instruments chromatographs
