ATSAMD20G15B-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G15 |
| JESD-30 Code | S-XQCC-N48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| Speed | 48MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20G15B-MU Overview
For the purpose of saving space, it is available in the 48-VFQFN Exposed Pad package. Surface Mount is used for mounting. You can find it in the package of Tray. The device runs in ARM? Cortex?-M0+ core processor. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 38 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of ATSAMD20G15. QUAD is the position of its terminals on the board. 48 terminations are present in it. This electrical component is part of the SAM D20G series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. In the device, the clock runs at 32MHz. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.62V. Using a Internal oscillator type, it works well.
ATSAMD20G15B-MU Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20G15B-MU Applications
There are a lot of Microchip Technology ATSAMD20G15B-MU Microcontroller applications.
- Playstation
- ECG machine
- Fire detection & safety devices
- DDC control
- Binding machines
- Toasters
- Projectors
- Torpedo guidance
- Medical instruments chromatographs
- Process control devices
