ATSAMD20G16A-ANT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G16 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 512 kb |
| Core Architecture | ARM |
| Number of Programmable I/O | 38 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20G16A-ANT Overview
As a result, it is available in the 48-TQFP package. A Surface Mount mounting method is used. There is a Tape & Reel (TR) package available for it. Devices with ARM? Cortex?-M0+ core processors are available. Work should be performed at a temperature of -40°C~105°C TA. The type of memory it uses is FLASH. It has a number of 38I/Os. In order to find similar components, it has a base part number of ATSAMD20G16. The terminals of this device are located at QUAD. It has 48 terminationals. There are a number of electrical components in the SAM D20G series, including this one. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There are 48 pins used in the construction of this device. The devices have a memory size of 64kB that can be used to store programs and data. Its core architecture is ARM. The system is highly efficient when working at a frequency of 48MHz. 6 timer/counters are present. There are a total of 38 programmable I/Os. Using an oscillator type of Internal, it works.
ATSAMD20G16A-ANT Features
48-TQFP package
Mounting type of Surface Mount
ATSAMD20G16A-ANT Applications
There are a lot of Microchip Technology ATSAMD20G16A-ANT Microcontroller applications.
- Heater/Fan
- Volt meter
- Calculators
- Digital set-top boxes
- Hard drives
- Missile control
- Computer/laptop
- Graphic terminals
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Dialysis machines (performs function of liver)
