ATSAMD20G16A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G16 |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 512 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 38 |
| Number of ADC Channels | 14 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD20G16A-AU Overview
There is an option to purchase it in the 48-TQFP package, which saves space. Surface Mount is the way to mount it. It comes in the package?of a Tray. The device runs in ARM? Cortex?-M0+ core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. A total of 38 I/Os are present. To find equivalent components, use its ATSAMD20G16 base part number. At QUAD, its terminals are located. In this case, there are 48 terminationals. The SAM D20G series contains this electrical component. By using a 3.3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 48 pins are used. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. ARM is the foundation of its architecture. Power comes from a source of 1.8/3.3V. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. There are 6 timers/counters. CORTEX-M0 CPUs are included in this part. There are 38 programmable input/output ports on the chip. An oscillator of type Internal is used.
ATSAMD20G16A-AU Features
48-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20G16A-AU Applications
There are a lot of Microchip Technology ATSAMD20G16A-AU Microcontroller applications.
- Instrument control
- Keyboards
- Electronic jamming systems
- Playstation
- Auto-breaking system
- Calculators
- Sonography (Ultrasound imaging)
- Robots
- Digital TVs
- Light sensing & controlling devices
