ATSAMD20G16A-MU
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G16 |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 512 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 38 |
| Number of ADC Channels | 14 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 150.507618mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
ATSAMD20G16A-MU Overview
To save space, it is included in the 48-VFQFN Exposed Pad package. Surface Mount is the way to mount it. It comes in a Tray package. Device with ARM? Cortex?-M0+ core processor issupported. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. There are 38 I/Os on the board. It has a part number of ATSAMD20G16 that can be used to locate similar components. QUAD is the location of its terminals. This circuit consists of 48 terminationals. Part of the SAM D20G series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 48 pins are used to construct it. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. ARM is its core architecture. There is 1.8/3.3V power source in this device. Using a frequency of 48MHz, it is very efficient. 6 timer/counters are present. It is a member of the CORTEX-M0 family of CPUs. There are a total of 38 programmable I/Os available. It works with an oscillator type Internal.
ATSAMD20G16A-MU Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20G16A-MU Applications
There are a lot of Microchip Technology ATSAMD20G16A-MU Microcontroller applications.
- Heart rate monitors
- Binding machines
- Dryers
- Oil and gas
- Calculator
- Guidance-GPS
- Virtual reality VR robots
- Equipment control
- Television
- Hard drives
