ATSAMD20G16A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 150.507618mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 512 kb |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 38 |
| Number of ADC Channels | 14 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20G16A-MUT Overview
There is a 48-VFQFN Exposed Pad package available to save space. Surface Mount is used for mounting. This item can be found in package Tape & Reel (TR). There is a ARM? Cortex?-M0+ as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 38 I/Os on the board. A component with the same part number as ATSAMD20G16 can be compared to other similar components. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 48 terminations present. SAM D20G is the series number of this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 48 pins are used to construct it. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. A core architecture of ARM is used. Working at a frequency of 48MHz results in excellent efficiency. It appears that there are 8 timers/counters in use. It is a member of the CORTEX-M0 family of CPUs. There are 38 programmable input/output ports on the chip. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. The oscillator type Internal is used to operate the device.
ATSAMD20G16A-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20G16A-MUT Applications
There are a lot of Microchip Technology ATSAMD20G16A-MUT Microcontroller applications.
- Laminators
- Smartphones-calling, video calling, texting, email
- Home appliances
- X-ray
- Dialysis machines (performs function of liver)
- Scanners
- Dishwashers
- Coffee machines
- Oscilloscopes
- Computer/laptop
