ATSAMD20G16B-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G16 |
| JESD-30 Code | S-PQFP-G48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| Speed | 48MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 65536 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20G16B-AU Overview
There is a 48-TQFP package available to save space. Surface Mount is used for mounting. Tray is the package that contains it. It is equipped with a ARM? Cortex?-M0+ core processor. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 38 I/Os are present. Based on its base part number of ATSAMD20G16, other similarly-sized components can be found. At QUAD, its terminals are located. This circuit consists of 48 terminationals. The SAM D20G series includes this electrical component. The 3.3V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. In the device, the clock runs at 32MHz. Normal operation requires a supply voltage (Vsup) above 1.62V. Using oscillator type Internal makes it work.
ATSAMD20G16B-AU Features
48-TQFP package
Mounting type of Surface Mount
ATSAMD20G16B-AU Applications
There are a lot of Microchip Technology ATSAMD20G16B-AU Microcontroller applications.
- Television
- Multi-meter
- Magnetic resonance imaging (MRI)
- Toys
- Communication-bluetooth, Wi-Fi, radio
- Tape drives
- Heart rate monitors
- DVD\DV\MP3 players
- Projectors
- Washing machine
