ATSAMD20G16B-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G16 |
| JESD-30 Code | S-XQCC-N48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| Speed | 48MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 65536 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20G16B-MU Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. You can find it in the package of Tray. With a processor of ARM? Cortex?-M0+ cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 38 I/Os on the board. To find equivalent components, use its ATSAMD20G16 base part number. The terminals of this device are set to QUAD. It has 48 terminationals. An electrical component such as this is included in the series SAM D20G. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There is a clock running in the device at a frequency of 32MHz. A supply voltage (Vsup) above 1.62V is necessary for normal operation. Using an oscillator type of Internal, it works.
ATSAMD20G16B-MU Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20G16B-MU Applications
There are a lot of Microchip Technology ATSAMD20G16B-MU Microcontroller applications.
- Virtual reality VR robots
- Robots
- Playstation
- Fax machines
- Walkie talkies
- Light sensing & controlling devices
- Robotic prosthetic limbs
- Projectors
- Industrial instrumentation devices
- Dryers
