ATSAMD20G17A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 150.507618mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | SAM D20G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD20G17 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 1 Mb |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 38 |
| Number of ADC Channels | 14 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20G17A-MUT Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. It is available in the Tape & Reel (TR) package. It is equipped with a ARM? Cortex?-M0+ core processor. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory it uses is FLASH. 38 I/Os can be found on it. It has a part number of ATSAMD20G17 that can be used to locate similar components. QUAD is the position of its terminals on the board. 48 terminations are present in it. The SAM D20G series includes this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 48 pins are used to construct it. This component is a part of Microcontrollers. Using the devices' 128kB memory size, you can store programs and data. ARM forms the basis of its architecture. Working at a frequency of 48MHz results in excellent efficiency. A total of 8 timers/counters have been set up. It is part of the CORTEX-M0 CPU family. The number 38 represents the number of programmable I/O ports on the board. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.62V. Using an oscillator type of Internal, it works.
ATSAMD20G17A-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20G17A-MUT Applications
There are a lot of Microchip Technology ATSAMD20G17A-MUT Microcontroller applications.
- Heart rate monitors
- Firewalls
- Safety -airbags, automatic braking system (ABS)
- Glucose monitoring systems (for Type 1 Diabetes)
- Printers
- Television
- Electronic jamming systems
- Removable disks
- Walkie talkies
- Fax machines
