ATSAMD20G18A-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | SAM D20G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD20G18 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 38 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD20G18A-AN Overview
As a result, it is available in the 48-TQFP package. It is mounted using the way of Surface Mount. A package of Tray contains it. It is equipped with a ARM? Cortex?-M0+ core processor. When working, it is recommended that the temperature be kept at -40°C~105°C TA. FLASH has been assigned to it as a program memory. 38 I/Os can be found on it. Based on its base part number of ATSAMD20G18, other similarly-sized components can be found. QUAD is the location of its terminals. There are a total of 48 terminations in it. An electrical component such as this is included in the series SAM D20G. The supply voltage of 3.3V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed using 48 pins. It is possible to store programs and data on the devices, as they have a memory size of 256kB. A core architecture of ARM is used. At a frequency of 48MHz, it can achieve excellent efficiency. A total of 6 timers/counters have been set up. 38 is the number of programmable I/O. There is an oscillator type Internal used in this circuit.
ATSAMD20G18A-AN Features
48-TQFP package
Mounting type of Surface Mount
ATSAMD20G18A-AN Applications
There are a lot of Microchip Technology ATSAMD20G18A-AN Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Volt meter
- Data acquisition and control
- Air fryers
- Television
- DDC control
- Instrument control
- Refrigerators
- Smartphone
- Fire detection & safety devices
