ATSAMD20G18A-ANT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G18 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 38 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
ATSAMD20G18A-ANT Overview
A space-saving advantage is that it is included in the 48-TQFP package. Surface Mount is the way to mount it. It comes in the package?of a Tape & Reel (TR). With a processor of ARM? Cortex?-M0+ cores, the device is powered. Maintain a temperature of -40°C~105°C TA while working. There is FLASH program memory in it. 38 I/Os have been provided by the device. A comparable component can be found by using the base part number ATSAMD20G18. The terminals of this device are set to QUAD. It consists of 48 terminationals. In the SAM D20G series, this electrical component is found. Because of the 3.3V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 48 pins are used in its construction. The devices have a maximum memory size of 256kB that can be used to store programs and data. A core architecture of ARM is used. It performs extremely well at a frequency of 48MHz. It appears that there are 6 timers/counters in use. The number 38 represents the number of programmable I/O ports on the board. There is an oscillator type Internal used in this circuit.
ATSAMD20G18A-ANT Features
48-TQFP package
Mounting type of Surface Mount
ATSAMD20G18A-ANT Applications
There are a lot of Microchip Technology ATSAMD20G18A-ANT Microcontroller applications.
- Dryers
- Hand-held metering systems
- Digital TVs
- Equipment control
- Wastewater treatment
- Smart highways (navigation, traffic control, information monitoring and car service)
- Tape drives
- Mice
- Industrial instrumentation devices
- Firewalls
