ATSAMD20G18A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G18 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 38 |
| Number of ADC Channels | 14 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20G18A-AUT Overview
To save space, it is included in the 48-TQFP package. The way of Surface Mount is used to mount it. It is available in the Tape & Reel (TR) package. It is equipped with a ARM? Cortex?-M0+ core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. There are 38 I/Os on the board. It has a part number of ATSAMD20G18 that can be used to locate similar components. The terminals are positioned at QUAD. This circuit consists of 48 terminationals. An electrical component such as this is included in the series SAM D20G. The 3.3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 48 pins are used to construct it. Subcategory Microcontrollers includes this component. A device with a memory size of 256kB can store programs and data. Its core architecture is based on ARM. Working at a frequency of 48MHz results in excellent efficiency. There are 8 timers/counters. It belongs to the CORTEX-M0 CPU family. There are 38 programmable input/output ports on the chip. Vsup should be kept above 1.62V for normal operation. The oscillator type Internal is used to operate the device.
ATSAMD20G18A-AUT Features
48-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20G18A-AUT Applications
There are a lot of Microchip Technology ATSAMD20G18A-AUT Microcontroller applications.
- Xbox
- Microwave ovens
- ECG machine
- Toys
- Sonography (Ultrasound imaging)
- DCS control intelligent sensor
- Data acquisition and control
- Fax machines
- Graphic terminals
- Computed Tomography (CT scan)
