ATSAMD20G18A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 150.507618mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G18 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 38 |
| Number of ADC Channels | 14 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20G18A-MUT Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. There is a Tape & Reel (TR) package available for it. The device runs in ARM? Cortex?-M0+ core processor. When working, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 38 I/Os are present on the device. It has a base part number of ATSAMD20G18 that can be used to find other components that are comparable. QUAD is the location of its terminals. It consists of 48 terminationals. An electrical component such as this is included in the series SAM D20G. Using the 3.3V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is composed of 48 pins. This component is a part of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 256kB. A core architecture of ARM is used. Working at a frequency of 48MHz results in excellent efficiency. 8 timer/counters are present. It is a member of the CORTEX-M0 family of CPUs. The number 38 represents the number of programmable I/O ports on the board. Normally, the supply voltage (Vsup) should remain above 1.62V. It works with an oscillator type Internal.
ATSAMD20G18A-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20G18A-MUT Applications
There are a lot of Microchip Technology ATSAMD20G18A-MUT Microcontroller applications.
- Equipment control
- Microwave ovens
- Entertainment products
- Microwave ovens
- Speed meter
- X-ray
- Copiers
- Electrocardiogram (EKG)
- Air fryers
- Projector
