ATSAMD20G18A-UUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 45-XFBGA, WLCSP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20G |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 45 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20G18 |
| JESD-30 Code | R-PBGA-B45 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Density | 2 Mb |
| Core Architecture | ARM |
| Height Seated (Max) | 0.483mm |
| Length | 2.944mm |
| Width | 2.699mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20G18A-UUT Overview
For space savings, it is available in the 45-XFBGA, WLCSP package. In this case, it is mounted using the method of Surface Mount. Tape & Reel (TR) is the package that contains it. The device has a ARM? Cortex?-M0+ core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 38 I/Os on it. A comparable component can be found by using the base part number ATSAMD20G18. A BOTTOM position is assigned to its terminals. 45 terminationals are present. An electrical component such as this is included in the series SAM D20G. Because the supply voltage is 3.3V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. In the device, there is a memory capacity of 256kB which may be used to store programs and data. There is ARM core architecture for this system. It performs extremely well at a frequency of 48MHz. Vsup should be kept above 1.62V for normal operation. Using an oscillator type Internal, it operates.
ATSAMD20G18A-UUT Features
45-XFBGA, WLCSP package
Mounting type of Surface Mount
ATSAMD20G18A-UUT Applications
There are a lot of Microchip Technology ATSAMD20G18A-UUT Microcontroller applications.
- Fire detection & safety devices
- Mobile computers
- Hard drives
- Keyboards
- Wastewater treatment
- Firewalls
- Guidance-GPS
- Aerospace navigation systems
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Ipad
