ATSAMD20J14A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 128 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD20J14A-AU Overview
It is available in the 64-LQFP package for the benefit of saving space. Using Surface Mount, it is mounted. It comes in a Tray package. The device runs in ARM? Cortex?-M0+ core processor. The temperature should be kept at -40°C~85°C TA while working. Its type of program memory is FLASH. 52 I/Os can be found on it. Other components that are comparable to it have the base part number ATSAMD20J14. The position of the device is QUAD at terminal. It consists of 64 terminationals. The electrical component is part of the series SAM D20J. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 64 pins are used to construct it. It is one of the components included in Microcontrollers. Memory size for the devices is 16kB, which can be used to store programs and data. A core architecture of ARM is used. At a frequency of 48MHz, it can achieve excellent efficiency. There are currently 8 timers/counters set up on the system. This part is part of the CORTEX-M0 family of CPUs. There are a total of 52 programmable I/Os available. Normally, the supply voltage (Vsup) should remain above 1.62V. Using a Internal oscillator type, it works well.
ATSAMD20J14A-AU Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J14A-AU Applications
There are a lot of Microchip Technology ATSAMD20J14A-AU Microcontroller applications.
- Tape drives
- Process control devices
- Measuring revolving objects
- Dryers
- Teletext terminals
- Printers
- DVD\DV\MP3 players
- Smartphones-calling, video calling, texting, email
- Leakage current tester
- Automatic staplers
