ATSAMD20J14A-CN
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J14 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 32 MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
ATSAMD20J14A-CN Overview
It is available in the 64-UFBGA package for the benefit of saving space. The way of Surface Mount is used to mount it. Tray is the package that contains it. Device with ARM? Cortex?-M0+ core processor issupported. The temperature should be kept at -40°C~105°C TA while working. There is FLASH program memory in it. There are 52 I/Os on it. It has a part number of ATSAMD20J14 that can be used to locate similar components. The terminals of this device are set to BOTTOM. It consists of 64 terminationals. It is a member of the SAM D20J series of electrical components. It is possible to achieve high efficiency with a 3.3V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. For its construction, 64 pins are used. The mounting of this device is carried out following the method of Surface Mount. Memory size for the devices is 16kB, which can be used to store programs and data. The core architecture of the system is ARM. Using a frequency of 48MHz, it is very efficient. 8 timers/counters are in use. A supply voltage (Vsup) above 1.62V is necessary for normal operation. An oscillator of type Internal is used.
ATSAMD20J14A-CN Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J14A-CN Applications
There are a lot of Microchip Technology ATSAMD20J14A-CN Microcontroller applications.
- Sonography (Ultrasound imaging)
- Computer/laptop
- Toasters
- Monitoring-temperature level, oil level, speed, distance, acceleration
- ECG machine
- Fire alarms
- Keyboards
- Petrochemical
- Refrigerators
- Broadband technology, video and voice processing
