ATSAMD20J14A-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J14 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J14A-CU Overview
Due to the benefits of saving space, it is available in the 64-UFBGA package. Using Surface Mount, it is mounted. A package of Tray contains it. The device runs in ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 52 I/Os on the board. To find equivalent components, use its ATSAMD20J14 base part number. At BOTTOM, it has its terminals. 64 terminations are present in it. Part of the SAM D20J series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. The structure is composed of 64 pins. The method of Surface Mount is used to mount it. In the device, there is a memory capacity of 16kB which may be used to store programs and data. ARM forms the basis of its architecture. It performs extremely well at a frequency of 48MHz. The number of timers and counters is 8. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. The oscillator type Internal is used to operate the device.
ATSAMD20J14A-CU Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J14A-CU Applications
There are a lot of Microchip Technology ATSAMD20J14A-CU Microcontroller applications.
- Oscilloscopes
- Petrochemical
- Volt meter
- Smart highways (navigation, traffic control, information monitoring and car service)
- Paper shredders
- Speed meter
- Fabric
- Data acquisition and control
- Entertainment-radios, CD players, televisions
- Electromechanical control
