ATSAMD20J14A-MNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J14 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 128 kb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J14A-MNT Overview
As a result, it is available in the 64-VFQFN Exposed Pad package. Surface Mount is the way to mount it. Tape & Reel (TR) is the package that contains it. A core processor of ARM? Cortex?-M0+ is present in the device. Maintain a temperature of -40°C~105°C TA while working. FLASH is the type of program memory used by it. A total of 52 I/Os are present. It has a base part number of ATSAMD20J14 that can be used to find other components that are comparable. The terminals are positioned at QUAD. There are a total of 64 terminations in it. The electrical component is part of the series SAM D20J. It is possible to achieve high efficiency with a 3.3V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 64 pins. Using the devices' 16kB memory size, you can store programs and data. The core architecture of the system is ARM. At a frequency of 48MHz, it can achieve excellent efficiency. A total of 8 timers/counters have been set up. The number 52 represents the number of programmable I/O ports on the board. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. It works with an oscillator type Internal.
ATSAMD20J14A-MNT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J14A-MNT Applications
There are a lot of Microchip Technology ATSAMD20J14A-MNT Microcontroller applications.
- Sonography (Ultrasound imaging)
- Scanners
- Walkie talkies
- Calculators
- Electronic jamming systems
- Wastewater treatment
- Smart highways (navigation, traffic control, information monitoring and car service)
- Measuring revolving objects
- Instrument control
- Routers
