ATSAMD20J14A-MU
| Parameters | |
|---|---|
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 206.29948mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 128 kb |
| Core Architecture | ARM |
ATSAMD20J14A-MU Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in the package?of a Tray. The device has a ARM? Cortex?-M0+ core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is its program memory type. There are 52 I/Os on the board. In order to find similar components, it has a base part number of ATSAMD20J14. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 64 terminations present. There are a number of electrical components in the SAM D20J series, including this one. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 64 pins are used to construct it. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 16kB. Its core architecture is ARM. It performs extremely well at a frequency of 48MHz. A total of 8 timers/counters have been set up. It belongs to the CORTEX-M0 CPU family. There are 52 programmable I/Os. During normal operation, the supply voltage (Vsup) should be kept above 1.62V. Using an oscillator type of Internal, it works.
ATSAMD20J14A-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J14A-MU Applications
There are a lot of Microchip Technology ATSAMD20J14A-MU Microcontroller applications.
- Fabric
- Printers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Volt meter
- Firewalls
- Medical instruments chromatographs
- Walkie talkies
- Guidance-GPS
- Removable disks
- Television
