ATSAMD20J14B-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J14 |
| JESD-30 Code | S-XQCC-N64 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 48MHz |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 16384 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20J14B-MU Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. Surface Mount is used for mounting. You can find it in the package of Tray. A core processor of ARM? Cortex?-M0+ is present in the device. Working at -40°C~85°C TA temperature is recommended. There is FLASH program memory in it. 52 I/Os are present on the device. Other components that are comparable to it have the base part number ATSAMD20J14. The terminals of this device are located at QUAD. There are a total of 64 terminations in it. The electrical component is part of the series SAM D20J. Because of the 3.3V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. In the device, there is a clock running at 32MHz. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.62V. An oscillator type Internal is required for it to work.
ATSAMD20J14B-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J14B-MU Applications
There are a lot of Microchip Technology ATSAMD20J14B-MU Microcontroller applications.
- Process control devices
- Vacuum cleaners
- Playstation
- Ipad
- Electromechanical control
- Dialysis machines (performs function of liver)
- Xbox
- Toys
- Process control devices
- Home appliances
