ATSAMD20J15A-ANT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 256 kb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J15A-ANT Overview
Due to its space-saving qualities, it is available in the 64-TQFP Exposed Pad package. The way of Surface Mount is used to mount it. It comes in the package?of a Tape & Reel (TR). Devices with ARM? Cortex?-M0+ core processors are available. When working, it is recommended that the temperature be kept at -40°C~105°C TA. The type of memory it uses is FLASH. There are 52 I/Os on it. Other components that are comparable to it have the base part number ATSAMD20J15. The terminals of this device are set to QUAD. It has 64 terminationals. The SAM D20J series contains this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 64 pins. The devices have a maximum memory size of 32kB that can be used to store programs and data. There is ARM core architecture for this system. This device achieves excellent efficiency at frequencies of 48MHz. 8 timers/counters are in use. The number of programmable inputs and outputs is 52. Normal operation requires a supply voltage (Vsup) above 1.62V. An oscillator type Internal is required for it to work.
ATSAMD20J15A-ANT Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J15A-ANT Applications
There are a lot of Microchip Technology ATSAMD20J15A-ANT Microcontroller applications.
- Aerospace navigation systems
- Embedded gateways
- Graphic terminals
- Ipod
- Air fryers
- Tape drives
- Broadband technology, video and voice processing
- Electronic jamming systems
- Food and beverage
- Teletext terminals
