ATSAMD20J15A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 256 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J15A-AU Overview
A space-saving advantage is that it is included in the 64-LQFP package. Using Surface Mount, it is mounted. It comes in the package?of a Tray. It is equipped with a ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. 52 I/Os are present on the device. To find comparable components, use the ATSAMD20J15 base part number. At QUAD, its terminals are located. There are a total of 64 terminations in it. Part of the SAM D20J series, this electrical component is used in a variety of applications. By using a 3.3V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. 64 pins are used to construct it. It is one of the components included in Microcontrollers. Memory size for the devices is 32kB, which can be used to store programs and data. Its core architecture is based on ARM. It performs extremely well at a frequency of 48MHz. A total of 8 timers/counters are present. It belongs to the CORTEX-M0 CPU family. There are 52 programmable I/Os in the device. In order to maintain normal operation, Vsup must be above 1.62V. Internal is the oscillator type it uses.
ATSAMD20J15A-AU Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J15A-AU Applications
There are a lot of Microchip Technology ATSAMD20J15A-AU Microcontroller applications.
- Process control devices
- Hard drives
- Removable disks
- Electrocardiogram (EKG)
- Security systems
- Heart rate monitors
- Hearing aids
- DDC control
- Virtual reality VR robots
- Robots
