ATSAMD20J15A-CN
| Parameters | |
|---|---|
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 32 MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
ATSAMD20J15A-CN Overview
Due to the benefits of saving space, it is available in the 64-UFBGA package. In this case, it is mounted using the method of Surface Mount. In the package Tray, it is included. The device runs in ARM? Cortex?-M0+ core processor. It is important to keep the temperature at -40°C~105°C TA while working. FLASH is its program memory type. 52 I/Os are present on the device. To find equivalent components, use its ATSAMD20J15 base part number. BOTTOM is the position of its terminals on the board. A 64 termination is contained within it. The SAM D20J series includes this electrical component. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is composed of 64 pins. A method of mounting is used, which is Surface Mount. A device with a memory size of 32kB can store programs and data. ARM is the foundation of its architecture. This device achieves excellent efficiency at frequencies of 48MHz. The number of timers and counters is 8. Normally, the supply voltage (Vsup) should remain above 1.62V. There is an oscillator type Internal used in this circuit.
ATSAMD20J15A-CN Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J15A-CN Applications
There are a lot of Microchip Technology ATSAMD20J15A-CN Microcontroller applications.
- Heart rate monitors
- Guidance-GPS
- Oil and gas
- X-ray
- Set-top boxes
- Auto-breaking system
- Coffee machines
- Toys
- Automatic staplers
- Magnetic resonance imaging (MRI)
