ATSAMD20J15A-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 32768 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J15A-CU Overview
For space savings, it is available in the 64-UFBGA package. Mounted using Surface Mount. In the package Tray, it is included. ARM? Cortex?-M0+ core processor is present on the device. Maintain a temperature of -40°C~85°C TA while working. The type of memory it uses is FLASH. 52 I/Os can be found on it. In order to find similar components, it has a base part number of ATSAMD20J15. The position of the device is BOTTOM at terminal. It consists of 64 terminationals. The SAM D20J series includes this electrical component. The 3.3V supply voltage enables high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed using 64 pins. This mount is done in accordance with the method of Surface Mount. The devices have a memory size of 32kB that can be used to store programs and data. The architecture of its core is ARM. It is highly efficient when it works at a frequency of 48MHz. A supply voltage (Vsup) above 1.62V is necessary for normal operation. An oscillator type Internal is required for it to work.
ATSAMD20J15A-CU Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J15A-CU Applications
There are a lot of Microchip Technology ATSAMD20J15A-CU Microcontroller applications.
- Computer/laptop
- Keyboards
- Electrocardiogram (EKG)
- Instrument control
- Set-top boxes
- Medical instruments chromatographs
- Safety -airbags, automatic braking system (ABS)
- Calculator
- Heart rate monitors
- Switches
