ATSAMD20J15A-CUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 32768 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J15A-CUT Overview
There is a 64-UFBGA package available to save space. A Surface Mount mounting method is used. This item can be found in package Tape & Reel (TR). With a processor of ARM? Cortex?-M0+ cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. 52 I/Os are present on the device. It has a base part number of ATSAMD20J15 that can be used to find other components that are comparable. BOTTOM is the location of its terminals. A 64 termination is contained within it. This electrical component is part of the SAM D20J series. The 3.3V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed using 64 pins. Based on the Surface Mount method, it is mounted. Using the devices' 32kB memory size, you can store programs and data. The core architecture of the system is ARM. The system is highly efficient when working at a frequency of 48MHz. A supply voltage (Vsup) above 1.62V is necessary for normal operation. The oscillator type Internal is used to operate the device.
ATSAMD20J15A-CUT Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J15A-CUT Applications
There are a lot of Microchip Technology ATSAMD20J15A-CUT Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Digital TVs
- Fax machines
- Instrument control
- Binding machines
- Home video and audio
- Light sensing & controlling devices
- Graphic terminals
- Radio
- Robotic prosthetic limbs
