Parameters |
Memory Size |
32kB |
Oscillator Type |
Internal |
Number of I/O |
52 |
RAM Size |
4K x 8 |
Voltage - Supply (Vcc/Vdd) |
1.62V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
ARM® Cortex®-M0+ |
Peripherals |
Brown-out Detect/Reset, POR, WDT |
Program Memory Type |
FLASH |
Core Size |
32-Bit |
Program Memory Size |
32KB 32K x 8 |
Connectivity |
I2C, SPI, UART/USART |
Bit Size |
32 |
Data Converter |
A/D 20x12b; D/A 1x10b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
32b |
PWM Channels |
YES |
DAC Channels |
YES |
Number of Timers/Counters |
8 |
Density |
256 kb |
Core Architecture |
ARM |
Number of Programmable I/O |
52 |
Height Seated (Max) |
1mm |
Length |
9mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
64-VFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
64 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tray |
Published |
2015 |
Series |
SAM D20J |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
64 |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
48MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ATSAMD20J15 |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
1.62V |
Interface |
I2C, SPI, UART, USART |
ATSAMD20J15A-MN Overview
Due to its space-saving qualities, it is available in the 64-VFQFN Exposed Pad package. The way of Surface Mount is used to mount it. Package Tray contains it. It is equipped with a ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~105°C TA. FLASH has been assigned to it as a program memory. The device has 52 I/Os. It has a part number of ATSAMD20J15 that can be used to locate similar components. QUAD is the location of its terminals. It consists of 64 terminationals. An electrical component such as this is included in the series SAM D20J. By using a 3.3V voltage supply, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A number of 64 pins are used to construct it. It is possible to store programs and data on the devices, as they have a memory size of 32kB. The core architecture of the system is ARM. It performs extremely well at a frequency of 48MHz. There are currently 8 timers/counters set up on the system. 52 is the number of programmable I/O. In order to maintain normal operation, Vsup must be above 1.62V. There is an oscillator type Internal used in this circuit.
ATSAMD20J15A-MN Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J15A-MN Applications
There are a lot of Microchip Technology ATSAMD20J15A-MN Microcontroller applications.
- Robots
- Missile control
- Oscilloscopes
- Ipod
- Medical instruments chromatographs
- Accu-check
- Projectors
- Food and beverage
- Fire alarms
- Smart highways (navigation, traffic control, information monitoring and car service)