ATSAMD20J15A-MNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 256 kb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J15A-MNT Overview
Due to the benefits of saving space, it is available in the 64-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. Tape & Reel (TR) is the package that contains it. The device runs in ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~105°C TA. FLASH is its program memory type. There are 52 I/Os on the board. In order to find similar components, it has a base part number of ATSAMD20J15. The terminals are positioned at QUAD. In this case, there are 64 terminationals. The electrical component is part of the series SAM D20J. Because of the 3.3V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A number of 64 pins are used to construct it. It is possible to store programs and data on the devices, as they have a memory size of 32kB. In terms of architecture, it is based on ARM. Using a frequency of 48MHz, it is very efficient. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. The number of timers and counters is 8. A chip with 52 programmable inputs/outputs is available. An oscillator of type Internal is used.
ATSAMD20J15A-MNT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J15A-MNT Applications
There are a lot of Microchip Technology ATSAMD20J15A-MNT Microcontroller applications.
- Hearing aids
- Home appliances
- Routers
- PDAs, game consoles
- Instrument control
- Vacuum cleaners
- Missile control
- Dryers
- Industrial instrumentation devices
- Multi-meter
