ATSAMD20J15B-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| JESD-30 Code | S-PQFP-G64 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 48MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20J15B-AU Overview
As a result, it is available in the 64-TQFP Exposed Pad package. A Surface Mount mounting method is used. A package of Tray contains it. The device runs in ARM? Cortex?-M0+ core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 52 I/Os are present on the device. It has a part number of ATSAMD20J15 that can be used to locate similar components. The position of the device is QUAD at terminal. 64 terminationals are present. The SAM D20J series contains this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. In the device, the clock runs at 32MHz. Normal operation requires a supply voltage (Vsup) above 1.62V. An oscillator type Internal is required for it to work.
ATSAMD20J15B-AU Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J15B-AU Applications
There are a lot of Microchip Technology ATSAMD20J15B-AU Microcontroller applications.
- Equipment control
- Washing machine
- Information appliances (networking of household appliances)
- Smartphones-calling, video calling, texting, email
- DDC control
- Electronic jamming systems
- Toys
- Kindle
- Smart highways (navigation, traffic control, information monitoring and car service)
- DCS control intelligent sensor
