ATSAMD20J15B-MU
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J15 |
| JESD-30 Code | S-XQCC-N64 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 48MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 32768 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
ATSAMD20J15B-MU Overview
There is a 64-VFQFN Exposed Pad package available to save space. Mounted using Surface Mount. It comes in a Tray package. A core processor of ARM? Cortex?-M0+ is present in the device. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 52 I/Os can be found on it. Based on the ATSAMD20J15 base part number, it can be compared with other components. This device has terminals at QUAD. This circuit consists of 64 terminationals. In the SAM D20J series, this electrical component is found. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. 32MHz is the frequency of the device's clock. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. It works with an oscillator type Internal.
ATSAMD20J15B-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J15B-MU Applications
There are a lot of Microchip Technology ATSAMD20J15B-MU Microcontroller applications.
- Projectors
- Walkie talkies
- DCS control intelligent sensor
- Switches
- Torpedo guidance
- Food and beverage
- Removable disks
- DDC control
- Measuring revolving objects
- Aerospace navigation systems
