ATSAMD20J16A-CN
| Parameters | |
|---|---|
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J16 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 32 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
ATSAMD20J16A-CN Overview
It is available in the 64-UFBGA package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. It is available in the Tray package. Devices with ARM? Cortex?-M0+ core processors are available. It is important to keep the temperature at -40°C~105°C TA while working. Memory type FLASH is used for program memory. The device has 52 I/Os. Based on the ATSAMD20J16 base part number, it can be compared with other components. This device has terminals at BOTTOM. It has 64 terminationals. In the SAM D20J series, this electrical component is found. The supply voltage of 3.3V allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. There are 64 pins used in the construction of this device. As a result, it is mounted in accordance with Surface Mount. In the device, there is a memory capacity of 64kB which may be used to store programs and data. Its core architecture is ARM. This device achieves excellent efficiency at frequencies of 48MHz. 8 timer/counters are present. Normally, the supply voltage (Vsup) should remain above 1.62V. Using a Internal oscillator type, it works well.
ATSAMD20J16A-CN Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J16A-CN Applications
There are a lot of Microchip Technology ATSAMD20J16A-CN Microcontroller applications.
- Mice
- Dialysis machines (performs function of liver)
- Magnetic resonance imaging (MRI)
- ECG machine
- Fire detection & safety devices
- Coffee machines
- Traditional industrial transformation
- Routers
- Switches
- Communication-bluetooth, Wi-Fi, radio
