ATSAMD20J16A-CUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J16 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J16A-CUT Overview
For the purpose of saving space, it is available in the 64-UFBGA package. In this case, it is mounted using the method of Surface Mount. In the package Tape & Reel (TR), it is included. A ARM? Cortex?-M0+ core processor powers the device. The temperature should be kept at -40°C~85°C TA while working. Its type of program memory is FLASH. 52 I/Os have been provided by the device. It has a part number of ATSAMD20J16 that can be used to locate similar components. The terminals of this device are located at BOTTOM. This circuit consists of 64 terminationals. In the SAM D20J series, this electrical component is found. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed with 64 pins. Based on the Surface Mount method, it is mounted. Data and programs may be stored on the devices which have a memory size of 64kB. There is ARM core architecture for this system. This device achieves excellent efficiency at frequencies of 48MHz. 8 timer/counters are present. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.62V. It works with an oscillator type Internal.
ATSAMD20J16A-CUT Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J16A-CUT Applications
There are a lot of Microchip Technology ATSAMD20J16A-CUT Microcontroller applications.
- Current meter
- Fax machines
- Missile control
- Xbox
- Hand-held metering systems
- Oscilloscopes
- Data acquisition and control
- Graphic terminals
- Paper shredders
- Glucose monitoring systems (for Type 1 Diabetes)
