ATSAMD20J16B-MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J16 |
| JESD-30 Code | S-XQCC-N64 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 48MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 65536 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20J16B-MN Overview
As a result, it is available in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. Tray is the package that contains it. The device runs in ARM? Cortex?-M0+ core processor. Working at -40°C~105°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. A total of 52 I/Os are available on this device. To find comparable components, use the ATSAMD20J16 base part number. The terminals of this device are set to QUAD. It has 64 terminationals. In the SAM D20J series, this electrical component is found. It is possible to achieve high efficiency with a 3.3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There is a clock running in the device at a frequency of 32MHz. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. Using an oscillator type of Internal, it works.
ATSAMD20J16B-MN Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J16B-MN Applications
There are a lot of Microchip Technology ATSAMD20J16B-MN Microcontroller applications.
- Robotic prosthetic limbs
- Television
- Data acquisition and control
- Torpedo guidance
- Magnetic resonance imaging (MRI)
- Automatic staplers
- Christmas lights
- Microwave ovens
- Dialysis machines (performs function of liver)
- Telephone sets
