ATSAMD20J16B-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J16 |
| JESD-30 Code | S-XQCC-N64 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 48MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 65536 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMD20J16B-MU Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. You can find it in the package of Tray. The device runs in ARM? Cortex?-M0+ core processor. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 52 I/Os on it, which makes it a very simple device. Based on its base part number of ATSAMD20J16, other similarly-sized components can be found. At QUAD, it has its terminals. In this case, there are 64 terminationals. The electrical component is part of the series SAM D20J. The 3.3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. In the device, the clock runs at a frequency of 32MHz. For normal operation, the supply voltage (Vsup) should be kept above 1.62V. Using oscillator type Internal makes it work.
ATSAMD20J16B-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J16B-MU Applications
There are a lot of Microchip Technology ATSAMD20J16B-MU Microcontroller applications.
- Xbox
- Current meter
- Digital set-top boxes
- Dishwashers
- DCS control intelligent sensor
- 3D printers
- Industrial robot
- Volt meter
- Microwave ovens
- Information appliances (networking of household appliances)
