ATSAMD20J17A-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J17 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 1 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J17A-AN Overview
Due to its space-saving qualities, it is available in the 64-TQFP Exposed Pad package. Surface Mount is the way to mount it. In the package Tray, it is included. With a processor of ARM? Cortex?-M0+ cores, the device is powered. Work should be performed at a temperature of -40°C~105°C TA. FLASH has been assigned to it as a program memory. 52 I/Os have been provided by the device. A component with the same part number as ATSAMD20J17 can be compared to other similar components. The terminals of this device are located at QUAD. 64 terminations are present in it. An electrical component such as this is included in the series SAM D20J. Because of the 3.3V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed using 64 pins. It is possible to store programs and data on the devices, as they have a memory size of 128kB. The architecture of its core is ARM. At a frequency of 48MHz, it can achieve excellent efficiency. It appears that there are 8 timers/counters in use. There are 52 programmable I/Os in the device. Normal operation requires a supply voltage (Vsup) above 1.62V. It works with an oscillator type Internal.
ATSAMD20J17A-AN Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J17A-AN Applications
There are a lot of Microchip Technology ATSAMD20J17A-AN Microcontroller applications.
- Washing machines
- Instrument control
- Coffee machines
- Blood pressure monitors
- Aerospace navigation systems
- Ipod
- Calculator
- Air fryers
- Kindle
- Toys
