ATSAMD20J17A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J17 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 1 Mb |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD20J17A-AU Overview
It is available in the 64-TQFP Exposed Pad package for the benefit of saving space. Surface Mount is the way to mount it. Package Tray contains it. It is equipped with a ARM? Cortex?-M0+ core processor. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 52 I/Os are present. A comparable component can be found by using the base part number ATSAMD20J17. This device has terminals at QUAD. A 64 termination is contained within it. The SAM D20J series contains this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 64 pins are used in its construction. It falls under the category of Microcontrollers. A device with a memory size of 128kB can store programs and data. Its core architecture is based on ARM. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 8. It belongs to the CORTEX-M0 CPU family. A chip with 52 programmable inputs/outputs is available. A supply voltage (Vsup) above 1.62V is necessary for normal operation. It works with an oscillator type Internal.
ATSAMD20J17A-AU Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J17A-AU Applications
There are a lot of Microchip Technology ATSAMD20J17A-AU Microcontroller applications.
- Home video and audio
- Binding machines
- Guidance-GPS
- Projector
- Vacuum cleaners
- Embedded gateways
- Removable disks
- PDAs, game consoles
- Security systems
- Oscilloscopes
