ATSAMD20J17A-CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J17 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J17A-CN Overview
There is an option to purchase it in the 64-UFBGA package, which saves space. In this case, it is mounted using the method of Surface Mount. It is available in the Tray package. ARM? Cortex?-M0+ core processor is present on the device. During work, the temperature should remain at -40°C~105°C TA. The type of memory in which this program is stored is FLASH. There are 52 I/Os on the board. Other components that are comparable to it have the base part number ATSAMD20J17. A BOTTOM position is assigned to its terminals. As far as terminations are concerned, there are 64 terminations present. Part of the SAM D20J series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. The structure is composed of 64 pins. This mount is done in accordance with the method of Surface Mount. Using the devices' 128kB memory size, you can store programs and data. A core architecture of ARM is used. It performs extremely well at a frequency of 48MHz. There are 8 timers/counters. Normal operation requires a supply voltage (Vsup) that is higher than 1.62V. The oscillator type Internal is used to operate the device.
ATSAMD20J17A-CN Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J17A-CN Applications
There are a lot of Microchip Technology ATSAMD20J17A-CN Microcontroller applications.
- Computed Tomography (CT scan)
- Home appliances
- Dishwashers
- Washing machines
- Vacuum cleaners
- Dryers
- Tape drives
- Mice
- Smartphones-calling, video calling, texting, email
- Industrial robot
