ATSAMD20J17A-CUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-UFBGA |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J17 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 1 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 0.65mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J17A-CUT Overview
As a result, it is available in the 64-UFBGA package. Surface Mount is used for mounting. You can find it in the package of Tape & Reel (TR). There is a ARM? Cortex?-M0+ as core processor in this device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 52 I/Os are available on this device. Other components that are comparable to it have the base part number ATSAMD20J17. A BOTTOM position is assigned to its terminals. A 64 termination is contained within it. An electrical component such as this is included in the series SAM D20J. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed using 64 pins. Memory size for the devices is 128kB, which can be used to store programs and data. There is ARM core architecture for this system. Working at a frequency of 48MHz results in excellent efficiency. It appears that there are 8 timers/counters in use. There are 52 programmable I/Os. In order to maintain normal operation, Vsup must be above 1.62V. An oscillator type Internal is required for it to work.
ATSAMD20J17A-CUT Features
64-UFBGA package
Mounting type of Surface Mount
ATSAMD20J17A-CUT Applications
There are a lot of Microchip Technology ATSAMD20J17A-CUT Microcontroller applications.
- Equipment control
- Wastewater treatment
- DCS control intelligent sensor
- Entertainment products
- Food and beverage
- Removable disks
- Hearing aids
- PDAs, game consoles
- Digital TVs
- Data acquisition and control
