ATSAMD20J17A-MNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J17 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 1 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J17A-MNT Overview
It is available in the 64-VFQFN Exposed Pad package for the benefit of saving space. It is mounted using the way of Surface Mount. Package Tape & Reel (TR) contains it. There is a ARM? Cortex?-M0+ as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. There is FLASH program memory in it. 52 I/Os have been provided by the device. Based on the ATSAMD20J17 base part number, it can be compared with other components. The terminals of this device are located at QUAD. A 64 termination is contained within it. The SAM D20J series includes this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 64 pins are used to construct it. Memory size for the devices is 128kB, which can be used to store programs and data. There is ARM core architecture for this system. When working at a frequency of 48MHz it is able to achieve excellent efficiency. It appears that there are 8 timers/counters in use. A chip with 52 programmable inputs/outputs is available. During normal operation, the supply voltage (Vsup) should be kept above 1.62V. Using oscillator type Internal makes it work.
ATSAMD20J17A-MNT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J17A-MNT Applications
There are a lot of Microchip Technology ATSAMD20J17A-MNT Microcontroller applications.
- Computed Tomography (CT scan)
- Playstation
- Digital TVs
- Accu-check
- Removable disks
- Microwave ovens
- Microwave ovens
- Smart instruments
- Xbox
- DCS control intelligent sensor
