ATSAMD20J18A-ANT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J18A-ANT Overview
A space-saving advantage is that it is included in the 64-TQFP Exposed Pad package. Mounted using Surface Mount. There is a Tape & Reel (TR) package available for it. Devices with ARM? Cortex?-M0+ core processors are available. The temperature should be kept at -40°C~105°C TA while working. It has a type of program memory of FLASH. 52 I/Os are present on the device. A component with the same part number as ATSAMD20J18 can be compared to other similar components. At QUAD, it has its terminals. This circuit consists of 64 terminationals. Part of the SAM D20J series, this electrical component is used in a variety of applications. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 64 pins. In order to store data and programs, the devices have a memory size of 256kB. Its core architecture is ARM. At a frequency of 48MHz, it can achieve excellent efficiency. In total, there are 8 timers and counters. 52 is the number of programmable I/O. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.62V. Using an oscillator type of Internal, it works.
ATSAMD20J18A-ANT Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J18A-ANT Applications
There are a lot of Microchip Technology ATSAMD20J18A-ANT Microcontroller applications.
- Computers and laptops-video calling, email, blogging
- Hand-held metering systems
- Dishwashers
- Traditional industrial transformation
- Gas monitoring systems
- Digital set-top boxes
- Medical instruments chromatographs
- Binding machines
- Guidance-GPS
- Robotic prosthetic limbs
