ATSAMD20J18A-AU
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J18 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 2 Mb |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
ATSAMD20J18A-AU Overview
Due to its space-saving qualities, it is available in the 64-LQFP package. The way of Surface Mount is used to mount it. Tray is the package that contains it. ARM? Cortex?-M0+ core processor is present on the device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. 52 I/Os can be found on it. A comparable component can be found by using the base part number ATSAMD20J18. QUAD is the location of its terminals. There are a total of 64 terminations in it. The SAM D20J series includes this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 64 pins are required to construct this device. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 256kB that can be used to store programs and data. Its core architecture is ARM. It is highly efficient when it works at a frequency of 48MHz. A total of 8 timers/counters have been set up. It is one of the members of the CPU family CORTEX-M0. The number of programmable inputs and outputs is 52. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.62V. There is an oscillator type Internal used in this circuit.
ATSAMD20J18A-AU Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J18A-AU Applications
There are a lot of Microchip Technology ATSAMD20J18A-AU Microcontroller applications.
- Current meter
- Printers
- Fax machines
- Equipment control
- Coffee machines
- Ipod
- Oil and gas
- Scanners
- Robots
- Binding machines
